3D Print-Knit Mask° 2.0

Adjustable nose bridge
72% Viscose, 28% PBT Polyester
50% reduction in weight from previous generation
Nimbly Made by Andari in California, USA

Built for use with Nelson Labs rated filters (sold separately), tested to provide ≥ 95% Bacterial Filtration Efficiency (BFE ≥ 95%)

Compare our masks HERE

Mask° FAQS

Disclaimer: The CDC recommends that the public wear face coverings and masks. Ministry of Supply face masks are not devices intended for use in the diagnosis of a disease or other conditions or in the cure, mitigation, treatment, or prevention of disease and do not meet the definition of a medical device as set forth in section 201(h) of the FD&C Act. Our masks are non-medical masks and are not N95 respirators or surgical masks.

Measure from the center of each ear canal across the mouth to approximate your size (see diagram).

Dimensions (length is from ear loop to ear loop):

• Small: 11.5" (Length) x 5" (Height)
• Standard: 13" (Length) x 5" (Height)
• Large: 14.5" (Length) x 5.75" (Height)

Thoroughly wash hands before and after handling
Discard filter before washing

All three masks must be added to cart in combination with code "MASK" entered at checkout in order to receive the discount. The $25 Mask value is subtracted from the total order value. You may bundle any combination of mask types and colors in order to meet the minimum requirement. Only one free mask per order regardless of quantity purchased. For any questions or requests please contact q@ministryofsupply.com